Free online landscaping tool

Paver Calculator

Estimate paving stones for patios and walkways plus the volume of gravel needed for the sub-base.

Calculate your quantities

Use metric or imperial units — choose different units for individual fields. Results update as you type.

Quick unitsYou can mix units for every measurement.
Adjust for offcuts, losses or site variation.
Your estimate
—

Methods & examples

How to use the paver calculator

Enter patio and individual paver dimensions, joint width, base thickness and an allowance.

Calculation formula

Paver count ≈ surface area ÷ [(paver length + joint) × (paver width + joint)], rounded up after allowance. Base aggregate volume = surface area × base depth.

Worked example

A 5 m × 4 m patio with 200 × 100 mm pavers and 3 mm joints needs roughly 1,053 pavers with 10% allowance; a 100 mm base needs 2 m³.

Frequently asked questions

Should I allow for paving cuts?

Yes. Enter a project-specific allowance depending on pattern, curves and edges.

Does the base estimate include bedding sand?

No. It only calculates the aggregate base depth entered.

Can I enter paver sizes in inches?

Yes. Each paver dimension and joint width has a separate unit selector.

Before you buy materials

Real laying patterns and product pack coverage vary; always confirm before purchasing. Every estimate depends on accurate measurements and actual product specifications. Use supplier documentation for final purchase quantities.