Free online finishing tool

Roofing Calculator

Estimate pitched roof surface area, roofing squares and approximate shingle bundles for a simple gable roof.

Calculate your quantities

Use metric or imperial units — choose different units for individual fields. Results update as you type.

Quick unitsYou can mix units for every measurement.
A 4:12 pitch means 4 units up for every 12 across.
Check the actual manufacturer coverage.
Adjust for offcuts, losses or site variation.
Your estimate
—

Methods & examples

How to use the roofing calculator

Enter horizontal overall plan length and width, not the slope length, then the rise:12 pitch and shingle coverage.

Calculation formula

Roof surface area ≈ horizontal plan area × √[1 + (rise/12)²]. Roofing squares = roof square feet ÷ 100.

Worked example

A 12 m × 8 m rectangular plan at 4:12 pitch has a slope area factor of about 1.054. The roof surface is about 101.2 m² before allowance.

Frequently asked questions

What is a roofing square?

One roofing square is 100 square feet of roof surface.

How many bundles make one roofing square?

Many products use roughly three bundles, but check the manufacturer: packaging and coverage vary.

Does the formula count dormers and valleys?

No. Split complex roofs into simple roof planes and calculate them separately.

Before you buy materials

This is a simple two-sided roof area estimate. It omits eaves, valleys, dormers, waste patterns and structural design. Every estimate depends on accurate measurements and actual product specifications. Use supplier documentation for final purchase quantities.